10W Elektryczny DIY Pistolet do Kleju na Gorąco Akumulatorowy Litowo Bezprzewodowy Klej na Gorąco Maszyna Do Ręcznego Rękodzieła Elektronarzędzie do Naprawy ZESTAW DO SAMODZIELNEGO UŻYTKU

Product parameters： Battery model: 1pc 18650 Battery capacity: 2500MAH Interface:Type-c Power: 5-10W Voltage: DC3.7V Fully charged lithium battery usage time: about 1.2-1.5 hours Features 1.ptc heating element heats up quickly and keeps the temperature constant 2. 3.7V low voltage, safe and anti-electric shock 3. Anti-leak nozzle design, no glue leakage or pouring 4. Smooth glue discharging 5.2500mAh large-capacity battery, long-lasting battery life 6. Trigger lever principle design, glue application is light and effortless Method of use: 1. Flip the switch to preheat the glue gun for 1 to 3 minutes before using it. 2. Insert the 7~ 7.2mm adhesive strip from the tail of the hot melt glue gun into the barrel and pull the trigger to control the amount of glue produced. Points for atfention: 1.When working, the temperature at the outlet of the hot melt glue gun and the melted glue is high, and the human body should not touch it. 2. Do not pull out the rubber strip from the glue inlet after the work is finished, so as not to burn or damage the glue gun caused by the melted glue. 3. Because this hot melt glue gun uses high-efficiency PTC heating body, if you do not glue for 15 minutes continuously, please turn off the power switch, so as to avoid the glue strip melting in the future and damage the glue gun.