Bolanle PH600 6-wejściowy, profesjonalny wzmacniacz słuchawkowy, system dystrybucji sygnału, odpowiedni do studia i na scenę z korektorem

Bass button adjusts the low-frequency channel Treble button can adjust high-frequency channel 1. The main table displays the input levels of the main input connector and the Directin connector on PH600. 2. Direct input spacing allows stereo signals to be connected through TRS cables. 3. The Phone Out connector allows headphones to be connected to each channel for individual monitoring. 4. The channel tool displays the output level of each channel. 5. The output level button controls the volume of the channel. The L/R Mono button allows you to hear the PH600 input signal in one channel. 7. The PH600 balance button controls the relationship between the main/direct input signal and the AUX input signal. If the AUX connector in the channel is not connected to any content, the balance handle controls the stereo balance of the main signal. The power button can turn on or off the device. 9. The main input connector allows the original audio to be sent to all channels. The PH600 receives individual stereo signals through quarter inch or XLR connectors, each with its own volume control. Please note that for cables connected to the Direct In connector, the main signal channel is muted. 10. The main output connector outputs signals directly from the main input jack through "or" XLR. The AUX IN interval on PH600 receives signals through a "cable". The signal can be mixed with the main in signal through the balance knob channel. If connecting the TS cable to the AUX IN socket, it is recommended that you press the Mono button on the channel so that the signal can be heard in both ears. The output interval on PH600 corresponds to the telephone output connector on the front panel.