Convoy C8 Plus z czerwoną latarką KR CSLNM1.23/SST-20-DR 18650, latarka wędkarska, kempingowa, myśliwska, LED

Specification: Material: Aluminum alloy Led: KR CSLNM1.23 620nm / LUMINUS SST-20-DR 660nm red light Reflector: Smooth Battery: C8+ runs on 1 piece of 18650 lithium battery protected or unprotected, please note that the battery is not included Brightness: max 366LM620nm / 3230mw660nm Illuminance value: 70.5 KCD 620nm Range: 531 meters, 620nm Diameter of head: 44.5mm Length: 142mm Diameter of body: 25.2mm Weight: 145g Package type: AWith 18650 battery: 1*C8+ Flashlight 1*18650 rechargeable battery 1*USB charger 1 * Rope BNo battery: 1*C8+ Flashlight 1 * Rope 1.Driver instructions 5 groups 1. Click the switch to turn the flashlight on/off, tap the switch to select mode 2. If the flashlight is turned on, tap the switch 20 times quickly to enter configuration mode -------------sub-option 1.1 normal-flash 1 time : tap the switch to select mode group 1 100% -------------sub-option 1.2 normal-flash 2 times : tap the switch to select mode group 2 100%-20% ------------- sub-option 1.3 normal-flash 3 times : tap the Switch to select mode group 3 100%-strobe -------------sub-option 1.4 normal-flash 4 times : tap the switch to select mode group 4 20%-100% -------------sub-option 1.5 normal-flash 5 times : tap the switch to select mode group 5 strobe-100% The mode has no memory The driver has low voltage protection 2.Driver Instructions: 12 Groups 1. Click the switch to turn the flashlight on/off, tap the switch to select mode 2. If the flashlight is turned on, tap the switch 20 times quickly to enter into configuration mode. On a visual interface, as long as you click on an option, it means that the option is selectedThe flashlight has no visual interfaceIt flashes to represent an option, and tap the switch in the flashing process means to select the option Option 1 normal-flash once + buzz-flash: tap the switch to enter into sub-option to select the mode group. If the user has no operation, the config mode will enter option 2 -------------sub-option 1.1 normal-flash 1 time : tap the switch to select mode g roup 1 0.1%, 1%, 10%, 35%, 100%, strobe, biking, battery-check -------------sub-option 1.2 normal-flash 2 times : tap the switch to select mode group 2 0.1%, 1%, 10%, 35%, 100% -------------sub-option 1.3 normal-flash 3 times: tap the switch to select mode group 3 100%, 35%, 10%, 1%, 0.1% -------------sub-option 1.4 normal-flash 4 times: tap the switch to select mode group 4 1%, 20%, 100%, strobe, cycling, battery-check, SOS -------------sub-option 1.5 normal-flash 5 times: tap the switch to select mode group 5 1%, 20%, 100% -------------sub-option 1.6 normal-flash 6 times: tap the switch to select mode group 6 100%, 20%, 1% -------------sub-option 1.7 normal-flash 7 times: tap the switch to select mode group 7 0.1%, 1%, 10%, 50%, strobe, cycling, battery-check, SOS -------------sub-option 1.8 normal-flash 8 times: tap the switch to select mode group 80.1%, 1%, 10%, 50% -------------sub-option 1.9 normal-flash 9 times: tap the switch to select mode group 9 50%, 10%, 1%, 0.1% ----- --------sub-option 1.10 normal-flash 10 times: tap the switch to select mode group 10 1%, 10%, 35%, 100% -------------sub-option 1.11 normal-flash 11 times: tap the switch to select mode group 11 100%, 20%, strobe -------------sub-option 1.12 normal-flash 12 times: tap the switch to select mode group 12100% only Option 2 Normal-Flash 2 Times + Buzz-Flash: Tap the switch to activate the mode memory or deactivate it. If the user has no operation, the flashlight will enter into the last mode Battery-check instructions 2.95V 1 flash, 2.95-3.25V 2 flashes, 3.25-3.55V 3 flashes, 3.55-3.85V 4 flashes, 3.85V 5 flashes