Latarka Convoy C8 Plus SFT40 Luminus Led Lanterna 18650 Latarka taktyczna przenośna oświetlenie kemping wędkarstwo praca

Parameters: Material: Aluminum alloy LED: Luminus SFT40 Low voltage warning: Yes Reverse polarity protection: Yes Lens type: Ar-coated glass lens Reflector: Smooth Tail spring: Phosphor copper gold plated. Can withstand the maximum current of 10A Low voltage warning: Yes Reverse polarity protection: Yes Mode memory: 4modes and 12groups drivers have mode memory Temperature control function: Yes except for ramping, As the temperature rises, the current will drop slowly, but this does not mean that the surface of the flashlight will not heat up. Tailstand: Yes Battery : C8+ runs on 1pcs INR or IMR18650 unprotected lithium battery Diameter of head : 44.5mm Length : 142mm Diameter of body : 25.2mm Weight : 145g Package type: A. With 18650 battery: 1*C8+ Flashlight 1*18650 rechargeable battery 1*USB charger 1*Rope B. No battery: 1*C8+ Flashlight 1*Rope 1.Driver instructions:(4 modes) Modes : 0.1%-3%-30%-100% max current output is 5000mA Its biggest advantage is that no frequency can be seen in any mode, and there is temperature management. It can control the flashlight temperature not to exceed 55 degrees Celsius, If the flashlight temperature is below 55 degrees Celsius, it will output full current. If it is above 55 degrees Celsius, it will constantly adjust the current so that the flashlight will not overheat. 2.Driver instructions:(12 groups) 1.click the switch to turn the flashlight on/off,tap the switch to select mode 2.if flashlight is turned on,tap the switch 20 times quickly to enter into config mode.(On a visual interface,as long as you click on an option, it means that the option is selected. The flashlight has no visual interface. It flashes to represent an option, and "tap the switch in the flashing process" means to select the option.) Option 1 (normal-flash 1 time + buzz-flash): tap the switch to enter into sub-option to select the mode group,If the user has no operation, the config mode will enter option 2. -------------sub-option 1.1 (normal-flash 1 time) : tap the switch to select mode group 1 (0.1%, 1%, 10%, 35%, 100%, strobe, biking, battery-check) -------------sub-option 1.2 (normal-flash 2 times) : tap the switch to select mode group 2 (0.1%, 1%, 10%, 35%, 100%) -------------sub-option 1.3 (normal-flash 3 times) : tap the switch to select mode group 3 (100%, 35%, 10%, 1%, 0.1%) -------------sub-option 1.4 (normal-flash 4 times) : tap the switch to select mode group 4 (1%, 20%, 100%, strobe, biking, battery-check, SOS) -------------sub-option 1.5 (normal-flash 5 times) : tap the switch to select mode group 5 (1%, 20%, 100%) -------------sub-option 1.6 (normal-flash 6 times) : tap the switch to select mode group 6 (100%, 20%, 1%) -------------sub-option 1.7 (normal-flash 7 times) : tap the switch to select mode group 7 (0.1%, 1%, 10%, 50%, strobe, biking, battery-check, SOS) -------------sub-option 1.8 (normal-flash 8 times) : tap the switch to select mode group 8(0.1%, 1%, 10%, 50%) -------------sub-option 1.9 (normal-flash 9 times) : tap the switch to select mode group 9 (50%, 10%, 1%, 0.1%) -------------sub-option 1.10 (normal-flash 10 times) : tap the switch to select mode group 10 (1%, 10%, 35%, 100%) -------------sub-option 1.11 (normal-flash 11 times) : tap the switch to select mode group 11 (100%, 20%, strobe) -------------sub-option 1.12 (normal-flash 12 times) : tap the switch to select mode group 12(100% only) Option 2 (normal-flash 2 times + buzz-flash): tap the switch to active the mode memory or inactive it,If the user has no operation,flashlight will enter into the last mode. Battery-check instructions: <2.95V 1 flash, 2.95-3.25V 2 flashes, 3.25-3.55V 3 flashes, 3.55-3.85V 4 flashes, >3.85V 5 flashes