Miniaturowa kamera dla zwierząt domowych, noszona, nagrywająca, rejestrator HD, kamera sportowa do jazdy na rowerze na świeżym powietrzu, obiektyw 1200 W, kamera noktowizyjna HD 1080p

Product instructions Power on: Press and hold the power on for 2 seconds before the machine is turned on, and the display displays the video recording standby state. Shut down: Press and hold the power on for 2 seconds before the machine shuts down, the display screen goes out Video recording: On the default video recording standby page, the blue indicator light is on, and then click [OK] to start recording. The blue indicator light starts to flash. When recording, there is a red video recording time in the upper right corner of the screen to display the recording time. Click [OK] again to stop recording. The video will be automatically saved to the memory card in a 5-minute file, and the video will be named after the date and time, with AVI as the suffix, and saved in the memory card. Take a photo: When the machine is in the video recording standby state, click [Power/Mode] once to switch to the photo mode. At this time, click [OK] once to take a photo flashing one photo at a time. If you keep cycling, the photos taken will be automatically saved to the memory card. Automatic infrared night vision: When the machine is recording, the night vision function will be automatically turned on when the camera detects insufficient light. At this time, the picture is black and white. When the camera detects sufficient light again, the night vision will be automatically turned off again, and the picture returns to color. View/playback playback: When the machine is standby, click [Power/Mode] twice to enter the playback viewing state. At this time, two folders appear on the page. [Video] and [Picture] can be selected through the [Power/Mode] keys. Return: In the video recording standby state, click [Power/Mode] twice to enter playback view. If you need to return to the video recording or photo shooting standby page at this time, you can press [Power/Mode] for 2 seconds to return to the video recording standby page at this time. Charging: When the word "Low Battery" appears on the screen, the machine will automatically shut down after 5 seconds. At this time, use a 5V/1A charging cable to charge the machine. When charging, the battery icon appears in the lower right corner of the display screen. The charging flashes, and the full stops flashing. Charging and recording: After the machine is connected to the power supply, it will automatically turn on and display standby status. At this time, it can be used while charging. You can operate any function. After power off, the current file will be automatically saved in the memory card. Reset and restart: When the device crashes or stops responding to the operation due to improper operation or other special reasons, you can click the reset button (note that it is not too much force) for reset. After the reset button is pressed, the device will automatically shut down. When the power is restarted, you can restore the previous settings. Time settings: The device will automatically generate a time.txt document and modify it according to the document format. 2023-12-21 18:47:13 Y Y Y (Y time watermark is on, N time watermark is off) Y (Y loop video recording on, N loop video recording off) Product related parameters: Product model: MD10 Video resolution: 1920*1080P Video frame rate: 30fps Video recording format: AVI Photo format: JPG Photo pixel: 3520*2460 Video compression format: MJPEG Video bit rate: 9 M bit/S Charging voltage: 5V/2A Battery type: Built-in high-capacity polymer lithium battery Battery capacity: 350 mAh Storage capacity: FAT32/exFAT format maximum support 512GB Interface type: Type-C Storage temperature: -40~+60℃ Working ambient temperature: -10~+45℃ Playing software: System-owned or mainstream audio and video playback software System: WIN 10 and WIN 11/XOS, ios