Narzędzie do usuwania plastiku z zegarków, stalowy regulator, narzędzie do regulacji długości, hurtowy obcinak do pasków zegarków

[Product Introduction] Individual weight: 21g The slot can open up to 28mm (measurements are taken manually, there may be errors, please refer to the actual product). The color of the accessories is sent randomly, please do not purchase if this is a concern The newly purchased watch (with a steel strap) must be too long; or the strap may become looser or tighter as the seasons change.So the watch disassembler is your ideal choice! How to use: Easy to use and easy to understand.Simply flatten the watch strap and place it on the pin of the watch disassembler, then turn the handle to use it 1. Unscrew the handle of the watch disassembler 2. Insert the watch strap into the slot of the watch disassembler 3. Align the tool with the small pin between the straps to be removed, then screw on the handle of the watch remover and push out the small pin. But be sure to first confirm that the watch strap is not secured with screws but with pins or hairpins.Just push it from the small opening towards the large opening and you're done! No matter how difficult the watch strap is to remove, it can be done in less than a minute!