Nawilżacz powietrza USB w kształcie planety – miniaturowy dyfuzor powietrza z oświetleniem otoczenia

Product model :SX-E330 Product material :PP/PC/ silicone/film/electronic components Working current :300-450mA Operating power :2.5W Spray volume :30-50mL/H Rated voltage: DC5V Data cable: Type-C power supply interface Tank capacity :330mL Instructions for use 1. Three levels of light (warm yellow light, natural white light, warm yellow/white light on at the same time) 2, two levels of fog 3, automatic power outages 4, with wooden base (removable) 5, two modes: continuous spray (about 4H), intermittent spray (about 8H) Step of adding water ① Turn it gently from left to right. Upper cover ② Take off the lid and add water to the tank ③ Rotate and press the upper cover to connect to the power supply ④ Click the button to start working Cotton stick operation method Absorbent cotton swab: Wet the swab thoroughly before use When replacing cotton sticks, pay attention to the bottom spring not to lose, so as not to affect the use ① Loaded spring ② Load cotton swabs ③ Connect the upper cover [Precautions] : This product is a humidifier, the material and structure are not suitable for aromatherapy, if you add essential oil, you need to pay attention to daily maintenance and cleaning, otherwise it may damage the service life of the product. It is recommended to use tap water for the humidifier, because distilled water is evaporated and purified water is extracted, which changes the original water quality. The use of purified water or distilled water may cause wet desktop phenomenon.