Przemysłowy pistolet do klejenia na gorąco elektrotermiczny 150 W - kompatybilny z klejami w sztyfcie 11 mm, termoregulacyjny, elektryczny przyrząd do naprawy DIY

Feature: 1. This series of products is suitable for rubber strips with a diameter of 11mm. 2. Insert the rubber strip from the end of the glue gun, feed it into the bucket, plug in the power, and preheat for 3-5 minutes. Press the trigger to squeeze out the sol and control the amount of glue. 3.During use, if you cannot use up one tape at a time, there is no need to remove the tape. You can plug in the power and preheat for 3-5 minutes before using it directly 4.This glue gun only requires 3-5 minutes of preheating time. This product undergoes long-term thickening and heating, quickly degumming within 15 seconds, with a maximum sunlight temperature of 150 ℃. More than 90% of traditional glue guns. Due to the use of more advanced heating systems, it is possible to preheat faster and improve dispensing efficiency. 5. Quick unloading, extremely fast dispensing speed, smooth and continuous gluing, using copper glue nozzle, smooth and continuous gluing, durable, rust proof, nozzle protection cover design, to prevent high-temperature burns. The glue gun can spray 0.07 ounces/2 grams of glue per minute. Specifications: Materials: Plastic and aluminum Working power: 100W Working voltage: 100 to 220V Working temperature: 180 ℃ Nozzle diameter: 0.070-0.078 inches Preheating time: 3-5 minutes Voltage: 3.6V Rubber rod diameter: 11x150mm Specifications: EU Plug/US Plug This package includes: 1* Hot melt glue gun Tips: 1. To prevent burns, please do not touch the glue solution flowing out of the gun. 2. To complete the work smoothly, please preheat the glue gun for about 3-5 minutes (preheating time) before use. Attention: The glue stick cannot be removed immediately after use. Advantages:Our glue gun will not leak, and we choose the best quality glue gun for our customers.