Reflektor COB do naprawy samochodów LED z ładowaniem przez USB, składany, wielofunkcyjny, mocny, roboczy

[Model] KXK-011A Folding Model Light bulb 2*XPE+COB LED [Product Dimensions] 12.8*5.3*3.6CM Net weight 182G [Box size] 13.5*7*4.5CM Gross weight 219G [Material] Aluminum alloy + ABS [Switch] Press the switch Battery Built-in 1800mAh 18650 battery [Charging method] Type-C USB charging supports 5V1A output [Position] 7 modes: 2*XPE strong light - 2*XPE weak light - 2*XPE flashing - COB strong light - COB weak light Press and hold for 3 seconds to switch between COB red light and COB red light flashing Zoom Mode Fixed focus Waterproof rating IP4 Lumen XPE180LMCOB400LM Range 100m [Charging time] 3 hours Battery life 3-8 hours [Features] With magnets and a hook bracket, the head can be adjusted 180 degrees and can rotate 360 degrees without limit [Indicator light] When charging, the LED indicator light at the switch position lights up red, and when fully charged and in use, it lights up green [Package includes] Work light + white USB cable + color box 100PCS gross/net weight: 21/21.8KG Box dimensions: 47.5*37.5*30.5CM [Model] KXK-011B hook type Light bulb 2*XPE+COB LED [Product Dimensions] 10.3*5.5*3.8CM Net weight 152G [Box size] 11*7.3*4.5CM Gross weight 178G [Material] Aluminum alloy + ABS [Switch] Press the switch Battery Built-in 1800mAh 18650 battery [Charging method] Type-C USB charging supports 5V1A output [Position] 7 modes: 2*XPE strong light - 2*XPE weak light - 2*XPE flashing - COB strong light - COB weak light Press and hold for 3 seconds to switch between COB red light and COB red light flashing Zoom Mode Fixed focus Waterproof rating IP6 Lumen XPE180LMCOB400LM Range 100m [Charging time] 3 hours Battery life 3-8 hours [Features] Dual strong magnetic hidden hook with 360-degree rotation and a clip for wallets, featuring a simple and elegant integrated design. [Indicator light] When charging, the LED indicator light at the switch position lights up red, and when fully charged and in use, it lights up green [Package includes] Work light + white USB cable + color box 100PCS gross/net weight: 18/18.6KG Box dimensions: 47.5*37.5*25.5CM 1. Check the battery: Make sure the battery has power and insert it into the flashlight in the correct direction. Do not use batteries of different brands, and do not mix old and new batteries. 2. Determine the fault: Unscrew the back part to expose the negative terminal of the battery, then use a metal piece such as a key or tweezers to connect the negative terminal of the battery to the exposed, unoxidized part of the flashlight body, and see if it lights up.If possible, it's about the flashlight switch Problem.Please follow step 3 for inspection. If it still doesn't light up, please check the solder joints between the circuit compartment and the circuit board for any open or loose welds. If there are any, please re-solder them to resolve the issue. 3. Check the tail cover switch: Unscrew the end of the flashlight and you will see that the outer ring of the switch cap has a switch pressure ring with two recesses. Use scissors or a sturdy pair of tweezers to insert into the two recesses and turn clockwise to check if the switch pressure ring is loose. Make sure the switch pressure ring is tightly pressed against the switch and there should be no looseness. 4. Check for poor contact: When the flashlight does not light up or has poor contact, check whether the lamp head is loose, inspect the tail cap to ensure the switch is tightly screwed and well-connected, and ensure that the copper post of the tail cap is in good contact with the metal ring of the tail cap. 5. Other issues: If the above methods still cannot resolve the issue, please contact our customer service, and we will assist you in resolving the problem.